Apollo series ON/OFF Grid solar inverter are in the true sense of Hybrid Solar inverter, It integrates all the functions of Grid tie and Off grid, It can not only use solar energy to supply power to the load, but also can upload power to the national grid. It can realize that both PV and GRID supply power to the load at the same time, making the system runs more intelligently. The PV voltage range is increased to 450V. Apollo series are divided into 24V3000W(Apollo-243MCP) and 48V5000W(Apollo-485MCP), which can meet the needs of most customers.
And it also supports the use of Without battery. At the same time, it supports the WIFI module, you can easily view the operating status of the system in your mobile phone application. Apollo series supports up to 9 units in parallel, up to 45KW in single-phase parallel, and can support three-phase 380V 45KW. The BMS system that can connect the battery through MODBUS or CAN makes the battery operating status clearly visible in the window.
Apollo series ON/OFF Grid solar inverter, meet all your needs for solar system.
Made By CNBOU.
Ares series with charge PSW inverter
1. AC charge current up to 60Amp
2. AC input range 170VAC-280VAC
3. Transfer time <10MS
4. Support “inverter priority” or “Grid Priority”
5. Touch screen display to setup parameters
6. Support AGM/GEL and Lifepo4 battery(BMS)
New pure sine wave power inverter interpret our ultimate pursuit. The BPlus series pure sine wave power inverter breaks through the peak parameters of high-frequency power inverters, from traditional 2times peak to 3times peak power. It lasts up to 2 second at 200% load. The BPlus series pure sine wave power inverter supports LCD displays, up to 30 meters of remote control showed battery power, output power, frequency, temperature, over temperature protection rising from 75 degrees to 90 degrees. BPlus-300W, BPlus-600W, BPlus-1000W, BPlus-2000W, BPlus-3000W, BPlus-5000W are all best power inverters for car/truck/RV/vehicle.
BPlus-300W Support 12VDC to 120VAC or 230VDC.
BPlus-600W Support 12VDC or 24VDC to 120VAC or 230VDC.
BPlus-1000W Support 12VDC, 24VDC or 48VDC to 120VAC or 230VDC
BPlus-2000W Support 12VDC, 24VDC or 48VDC to 120VAC or 230VDC
BPlus-3000W Support 24VDC or 48VDC to 120VAC or 230VDC
BPlus-5000W Support 48VDC to 120VAC or 230VDC
For BP series pure sine wave inverter, we could provide complete power section and customized functions for DC and AC terminals. They are widely used in small solar, vehicle and ship systems. We have 300W, 600W, 1000W, 2000W, 3000W, 5000W, 6000W, 8000W for option.
We can provide a variety of voltage customization functions on the DC side. E.g 12VDC to 120VAC, 24VDC to 120VAC, 48VDC to 120VAC, 60VDC to 120VAC, 72VDC to 120VAC, 96VDC to 120VAC, etc.
In addition to provide fully complying with the voltages of North America and Japan, we also provide 12VDC to 230VAC,24VDC to 230VAC,48VDC to 230VAC, 60VDC to 230VAC,72VDC to 230VAC,96VDC to 120VAC,110VDC to 230VAC, 220VDC to 230VAC. So the combination of BP series pure sine wave inverter will be very flexible. In the past 8 years, we have produced more than 200,000 inverters, which are very stable in various systems. Stable performance and low price are the only two factors for the BP series.
BP series is the best-selling series products of CNBOU. In the sales process, we also provide in-depth customized services to customers. According to customer needs, we analyzed and found that many customers requested to add charging function to BP series products. We have upgraded the BP series and added charging module to the product, which not only has the function of DC-AC, but also has the function of charging the battery. At present, the BP series with charge inverter only supports charging AGM/GEL batteries.
BP series with charge inverter also has the function of mains power priority,In the case of mains power, use mains power directly to supply power to the load and charge the battery. When the mains power is normal, use the mains power as much as possible to reduce the damage of the battery. When the mains power is unstable, it will automatically switch to the battery. Usually we need it at 9MS(Depending on the load and battery power, there will be certain changes). We all know that battery life is related to the times of charge and discharge cycles, some good batteries can provide up to 2000 battery cycles, Only by using the battery in a smarter state can you save costs. In the inverter system, the battery takes up a very large share of the cost. We increase the service life of the battery through the reasonable use of the battery, and make the cost of the entire inverter system reach the best state.
BP series with charge inverter support 600W, 1000W, 2000W, 3000W, 4000W, 5000W and 6000W, 12VDC the charge inverter charge current is 15Amp, 24VDC the Charge inverter charge current is 7Amp, 48VDC the charge inverter charge current is 5Amp.
CNBOU is a technology firm that not only satisfies our clients’ demands but also provides heavily customization service. Apart from meeting the needs of our customers, we do quantitative data analysis and according to that, we invented BP series with charger inverter. With time going by, we found some projects only need its bypass function instead of charge function, so we introduced BP series with bypass inverter, later to meet more clients’ demands.
The biggest difference between with bypass inverter and with charge inverter is that the charge function has been canceled but its bypass mode has been improved based on its prototype. After marketing research, we added priority mode function, which includes mains supply priority mode and inverter supply priority mode. For example, in the mode of mains supply priority, mains electricity is the first choice to deliver power to load when mains supply is normal, but it changes to inverter supply if mains supply is interrupted. Under normal conditions, its switching time is 9MS(load and battery level both affect switching time duration). Our inverter will switch to mains electricity automatically if mains supply becomes normal. This kind of function is extremely suitable for mobile base stations which use large-scale battery packs. Equipment, lights and ventilation devices all use mains electricity when mains supply is normal, but only equipment can be delivered the power from battery packs when mains supply cuts, lights and ventilation devices cannot get the power from battery packs. Fortunately, our inverter with bypass function is a good solution to this.
BP series with bypass inverter support 600W, 1000W, 2000W, 3000W, 4000W, 5000W and 6000W.